Don't let a small water spill ruin your laptop! This article will walk you through the steps of fixing a water-damaged laptop.
Step 1: Unplug and dry off your computer.
Step 2: Remove the battery.
Step 3: Disassemble (open up) your laptop and remove any visible moisture and let it air out for 24 hours.
Step 4: Examine the motherboard for any signs of damage, such as discoloration or warping.
Step 5: Connect everything back together and see if it starts to turn on (following all the steps in reverse). If not, then your laptop might be beyond repair.
How to fix a water damaged laptop in 5 steps
Step 1: Unplug and dry off your computer. Unplug your laptop and make sure to dry it off.
Step 2: Remove the battery. Remove the battery and let it air out for 24 hours.
Step 3: Disassemble (open up) your laptop and remove any visible moisture and let it air out for 24 hours. Open up your laptop and take out any visible moisture with a towel or paper towel, then let it sit open in a well-ventilated area for at least 24 hours. This will allow all of the remaining water to evaporate from inside your laptop.
Step 4: Examine the motherboard for any signs of damage, such as discoloration or warping. Examine the motherboard to see if there is any damage such as discoloration or warping that may indicate that there is additional water underneath the surface which you cannot see or feel when opening up your laptop. If you notice any of these signs, then continue to follow these steps but be sure to check around the area where you found this sign for hidden moisture too!
Step 1: Unplug and dry off your computer
Water is a laptop's worst enemy, so if your laptop comes in contact with any water it's important to act quickly.
The first thing you'll want to do is unplug the device and remove any connections to other devices. Next, use a towel or small wet cloth to dry off the outside of the computer as best as possible.
Be sure not to rub too hard or use anything that could scratch or damage the surface of your laptop.
Now that you've removed all the water from the outside of your laptop, let's turn our attention inside:
Step 2: Remove the battery
Laptops are delicate pieces of electronics. They require the proper care to keep them in good condition and functioning. One of the most important steps in laptop maintenance is protecting it from damage due to water.
A water spill on your laptop can cause serious or permanent damage, including short circuits, corrosion, and component failures. This article will walk you through the steps of fixing a water damaged laptop.
But before we get into how to fix a water damaged laptop, let's address the most common question:
What if I spilled water on my laptop?
The first thing you should do is unplug your laptop and dry off any visible moisture with a cloth or paper towel. Don't turn it on! Next, disconnect any cables and remove the battery (if possible). Disassemble your computer and remove any visible moisture and let it air out for at least 24 hours before turning it back on. Examine the motherboard for any signs of damage such as discoloration or warping after drying out. If there isn't any evidence of physical damage then try connecting everything back together and see if it turns on (following all steps in reverse order). If not, then you might need to seek professional help!
Step 3: Disassemble (open up) your laptop and remove any visible moisture and let it air out for 24 hours
After you've unplugged your laptop and dried it off, you should take it apart to remove any water or moisture. You should start with removing the battery to avoid a possible shock. Remove all visible moisture and then let it air out for 24 hours. When the laptop is dry, you can put it back together. If there was too much water damage, then this step might not be enough to fix the problem.
Step 4: Examine the motherboard for any signs of damage, such as discoloration or warping
It's important to examine the motherboard for any signs of damage after your computer has gotten wet. This is because, if there are any signs of damage, then it might not be worth the time and effort to replace parts or even fix it.
The motherboard is responsible for controlling how your laptop runs, so damage on the motherboard can lead to major errors in operation. Signs of damage can include discoloration or warping.
Check for signs of damage on the motherboard before you do anything else!
Step 5. Connect everything back together and see if it starts to turn on (following all the steps in reverse). If not, then your laptop might be beyond repair.
Step 1: Unplug and dry off your computer.
Step 2: Remove the battery.
Step 3: Disassemble (open up) your laptop and remove any visible moisture and let it air out for 24 hours.
Step 4: Examine the motherboard for any signs of damage, such as discoloration or warping.
Step 5: Connect everything back together and see if it starts to turn on (following all the steps in reverse). If not, then your laptop might be beyond repair.
Conclusion
If you live near the ocean or by a pool, it is always a good idea to keep your laptop away from water. If you think that your laptop has been exposed to water, then it is important to act quickly. Remove the battery and unplug your computer. Make sure that any visible moisture is removed and that the laptop is not plugged in. Allow the laptop to air out for 24 hours. Examine the motherboard for any damages such as discoloration or warping. If all else fails, it might be best to walk over to the nearest Apple store and buy a new one.
